How to Wear Powerbeats 2

Powerbeats 2 are the new wireless headphones from Beats by Dre, and they’re perfect for running. However, some people have a hard time figuring out how to wear them! They might think that Powerbeats 2 don’t fit or are uncomfortable – but this is not true at all. This article will walk you through how to wear your Powerbeats 2 correctly so they feel great while you work out.

How to Wear Powerbeats 2

how to wear powerbeats 2
How to Wear Powerbeats is a question we get asked all the time.

As someone who wears them frequently, I can tell you they are extremely comfortable and lightweight!

The first thing that will help with your fit is how you put it on. Make sure the top (ear side) of the earphones go into the ear canal first. This will ensure that you have a secure fit and not to mention how it prevents the sound from escaping out of your ears!

Once they’re in, make sure you adjust them so that they are sitting comfortably against your neck without too much pressure on either side (which can be painful).

The Powerbeats should feel snug but not tight around the neck. If there is no slack for adjustment or if it’s cutting off circulation, then it may need readjustment.

You want as little movement as possible when running – nothing worse than hearing all those sounds bounce around while wearing headphones! The more stable the Beats stay in place, the better workout experience we think everyone deserves 🙂

It also helps to create a seal around the ear – meaning to make sure there are no openings for sound to come through.

This is achieved by either pressing firmly on your outer ear or pulling up with the Beats in place! Once you have found that perfect fit, congratulations! You’re ready to get moving!

You can then adjust each side individually if they feel too tight or loose, and move the Beats down to your neck.

Once you have adjusted each ear cup individually if necessary , make sure they are snug against the bottom of your chin but not so much that it digs into your skin!

You want a nice comfortable fit for performance 🙂

If there is no slack in between either ear cups and your chin, then you may need to readjust them.

How to turn on Powerbeats 2

Finally, to turn the Powerbeats on and off, hold down the Beats logo for a few seconds.

You’ll know it’s turned on once you see a white light come through the center of each ear cup! Let go as soon as this happens or it will automatically shut off after three seconds.

It is very important that these are fully charged before using them during your workout – otherwise you won’t have much luck with staying powered up throughout your workout session :/ If they do run out mid-workout , then just plug in your USB charger into any power source (laptop, wall outlet), and within an hour you should be ready to go !

If there is no white color coming from the middle of the ear cups, then they are completely off and need to be turned on first.

The Powerbeats will turn off automatically after three minutes of no use or if you hold down the Beats logo for a few seconds.

This is another great feature that ensures your battery doesn’t run out mid-workout! And remember – stay hydrated as much as possible during workouts so you don’t get dehydrated 🙂 It’s always important to drink enough water before, during, and after workout sessions! Remember those tips next time you’re at the gym 😉

How do I charge my PowerBeats 2?

The Powerbeats come with a USB charger so you can easily plug them into any computer or power source.

It takes about one hour to fully charge your Beats, and they’ll last up to six hours of continuous playtime!

A great feature that ensures battery doesn’t run out mid-workout 🙂 If the white light from the ear cups is blinking red , then those will need charging as well ! Charge according to instructions on box – usually between two and three hours . You don’t want your PowerBeats dying during workout sessions because it would be absolutely horrible!! I know first hand how frustrating this can get 🙁 So make sure you read all directions before using !! Oh, and always remember: hydrate yourself as much as possible! Nothing worse than getting dehydrated during workout sessions, so drink up to avoid any issues 😀

This is especially important when using PowerBeats for the first time – make sure you read all directions and fully charge them before your first workout session (about one hour)! You don’t want to run into that problem. After that, it takes about two hours of charging for a full six-hour battery life 🙂 Make sure there’s no red light coming from the Beats ear cups if they’re dying in between workouts . This means they need more charging!! So remember: plug in USB charger and let it sit until ready ! Do not use while plugged in because this can damage your device or reduce its lifespan 🙁

Powerbeats 2 in the rain

It is safe to use your PowerBeats in the rain or during light drizzle ! Just make sure they are fully charged so you don’t run into any issues mid-workout. If it’s a heavy downpour , then I would suggest waiting until it stops raining before using them because this could damage earphones and cause malfunctions .

This means that you should not wear Powerbeats while swimming, showering, etc. unless otherwise stated by product manual. That being said – always remember to keep these dry since water can ingress into some components of the device causing failure! Waterproof headphones are definitely better for those tough workouts where sweat pours off your face nonstop!! But if there isn’t an option for waterproof headphones, then you can always use a sweatband or some other protective accessory to keep your earphones safe 🙂

This is not the case with Powerbeats. They are fine in light rain but if there’s any heavy downpour it would be better to wait until it stops before using them again . Waterproof devices are perfect for tough workouts in which sweat pours off your face. Otherwise, you can use a protective accessory to keep the earphones safe from water damage .

In order to charge Powerbeats, plug them into any computer or power source using the USB charger that came with it! It takes about one hour for full charging and lasts up to six hours of continuous playtime! For the best results, make sure they are fully charged before using them for the first time. If there’s a white light blinking red on both ear cups that means it needs charging as well – charge according to instructions on box (usually between two and three hours).


Recommended article: How to In Ear Monitors Work for Drummers


Do Powerbeats 2 have a microphone?

Yes! PowerBeats have a built-in microphone that allows you to answer phone calls and control Siri.

In order to charge your Beats, plug them into any computer or power source using the USB charger that came with it ! It takes about one hour for full charging and lasts up to six hours of continuous playtime ! For the best results, make sure they are fully charged before using them for the first time . If there’s a white light blinking red on both ear cups , then those will need charging as well – charge according to instructions on box (usually between two and three hours).

Yes! PowerBeats have a built-in microphone that allows you answer phone calls as well

How to use Powerbeats 2 wireless

Plug in your USB charger and leave it plugged in for about an hour. This will give your PowerBeats a full charge before you use them. After that, you can plug them into any computer or power source to keep them charged while you work out. But don’t wear them while they are charging because this will reduce their lifespan.

Powerbeats have a built-in microphone. It lets you answer phone calls and talk to Siri. You can charge them by plugging your headphones into an outlet for two hours to get six hours of battery life. Powerbeats are not waterproof, so do not shower with them on or swim during exercise sessions unless the manual says otherwise. Never leave the headphones plugged when they are fully charged (the light turns red) because it reduces their battery life.

Leave a Reply